AIRLUX YPH-12H-S1 Manuel d'utilisateur télécharger pdf (Page 10)

- - 9 - -

or decrease 1℃ or 1°F by pressing .

＊Press Speed button to choose a proper fan speed.

＊ Press Econ in the cooling and heating mode, the set

temperature is “27℃/ 80℉” under cooling mode, “23℃/ 73℉”

under heating mode, and fan speed is low. If want to change

temperature or speed, please Econ again to cancel..

＊Press Swing button to adjust the direction of vertical louver.

＊Adjust horizontal louver manually.

2. Dehumidifying Mode

＊Press Mode to choose dehumidifying when the unit is on or

under auto-on, now the screen will show

＊Setting temperature and choosing fan speed is unavailable under

this mode.

＊Adjust horizontal louver manually.

3. Fan mode

＊Press MODE button (or Fan button) to choose Fan mode, the

LCD will display

＊Select the fan speed by pressing SPEED button on the remote.

Under this mode, if press SPEED button for 5 seconds,

inner-dehumidifying mode will be activated, which means both

upper fan and lower fan will work. To cancel it press SPEED button

again for 5 seconds.

＊The temperature cannot be set under fan mode.

＊Press Swing button to make vertical louver swing or stop.

＊Adjust horizontal louver manually.

NOTE:

1. Under cooling mode, when the screen shows , please

add water from the top, which will improve cooling

efficiency, at the same time lowering the noise.

2. The unit will stop working when water level exceeds the

high level, please drain water with drainpipe. The unit will

start working when water is drained.

3. No need to use air exhaust duct when in Fan and

dehumidifying mode.

4. If your room is directly exposed to the sun, draw the

curtains please.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

AIRLUX YPH-12H-S1 Manuel d'utilisateur Page 10